Re: command to monitor hardware

From: cbaker@GOODYEAR.COM
Date: Fri Feb 13 2004 - 15:49:53 EST

Bigbrother

http://bb4.com

Christopher M. Baker
Senior Technical Support Analyst
DSE/TCO
Goodyear Tire and Rubber Company

=================================================
Contains Confidential and/or Proprietary Information.
May not be copied or disseminated without the expressed
written consent of The Goodyear Tire & Rubber Company.
=================================================

                      "Webb, Eric"
                      <EWEBB@COOPERLIG To: aix-l@Princeton.EDU
                      HTING.COM> cc: (bcc: Chris Baker/NA/GDYR)
                      Sent by: IBM AIX Subject: command to monitor hardware
                      Discussion List
                      <aix-l@Princeton
                      .EDU>

                      02/13/2004 03:32
                      PM
                      Please respond
                      to IBM AIX
                      Discussion List

Is there a command that will give hardware (enclosure) stats, such as
condition of power supplies, voltages, fans (rotational speed), etc? I
know
the error log should report a lot of these problems, but I'm looking for a
way to monitor these directly.

Thanks,

> Eric C. Webb
> Sr. Systems Analyst / AIX System Administrator
>
> Cooper Lighting Division IT
> (770) 486-4623 (770) 486-4677 FAX
>

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:36 EDT