From: Mark Lamport (lamport@KCMETRO.CC.MO.US)
Date: Wed Jan 07 2004 - 08:59:12 EST
It was on the download page yesterday. There are 3 ways to install it. One
way is identical to to the procedure for the 7017-S85, download to
/tmp/fwupdate and then update_flash.
----- Original Message -----
From: "Bill Verzal" <BVerzal@KOMATSUNA.COM>
Newsgroups: bit.listserv.aix-l
To: <aix-l@Princeton.EDU>
Sent: Wednesday, January 07, 2004 7:50 AM
Subject: Re: p670
> Unofficially, I've done it, but the CE's know me and I know them.
>
> As for Mcode, leave that to the CE. It is floppy based and last I
checked,
> it was not even on the Mcode download page.
>
> BV
> --------------------------------------------------------
>
> "If everything is coming your way, then you are in the wrong lane"
>
> Bill Verzal
> AIX Administrator, Komatsu America
> (847) 970-3726 - direct
> (847) 970-4184 - fax
>
>
>
> Mark Lamport
> <lamport@KCMETRO.
> CC.MO.US> To
> Sent by: IBM AIX aix-l@Princeton.EDU
> Discussion List cc
> <aix-l@Princeton.
> EDU> Subject
> p670
>
> 01/07/2004 05:42
> AM
>
>
> Please respond to
> IBM AIX
> Discussion List
> <aix-l@Princeton.
> EDU>
>
>
>
>
>
>
> Question for those of you who have a p670 under IBM maintenance, do you
> install the system microcode? And are you allowed to install new adapter
> cards? Our CE tells me if I do either, it will invalidate IBM
maintenance.
> We only have 1 61d IO drawer, I only see a restriction if you have 6 IO
> drawers. And why can't we install our own adapters in the PCI hot swap
> slots, seems simple enough to perform myself.
>
> thanks.
>
> Mark Lamport
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:28 EDT