From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Wed Dec 10 2003 - 12:21:52 EST
smtp runs on port 25. You do not need sendmail running to send mail out of
a box. Once you stop sendmail, telnet to port 25 will be closed.
BV
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
"Miller, Dave
(I.S.)"
<Dave.Miller@BHS. To
ORG> aix-l@Princeton.EDU
Sent by: IBM AIX cc
Discussion List
<aix-l@Princeton. Subject
EDU> Telnet port 25
12/10/2003 11:10
AM
Please respond to
IBM AIX
Discussion List
<aix-l@Princeton.
EDU>
Can someone point me in the write direction as to how I would easily
disallow telnet to port 25, but still allow telnet to port 23?
I.e. I don't want to be able to telnet to port 25 and send mail, but I
still want to run sendmail, and allow telnet… or am I looking at this
wrong? Thanks.
CONFIDENTIALITY NOTICE: This email communication and any attachments may
contain confidential and privileged information for the use of the
designated recipients named above. If you are not the intended recipient,
you are hereby notified that you have received this communication in error
and that any review, disclosure, dissemination, distribution or copying of
it or its contents is prohibited. If you have received this communication
in error, please reply to the sender immediately or by telephone at (413)
794-0000 and destroy all copies of this communication and any attachments.
For further information regarding Baystate Health System's privacy policy,
please visit our Internet web site at http://www.baystatehealth.com.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:24 EDT