From: Patrick B. O'Brien (pobrien@DOIT.NV.GOV)
Date: Wed Dec 10 2003 - 12:18:22 EST
If you have sendmail running, port 25 has to be open. Stop sendmail and port 25 will be closed.
-----Original Message-----
From: Miller, Dave (I.S.) [mailto:Dave.Miller@BHS.ORG]
Sent: Wednesday, December 10, 2003 9:11 AM
To: aix-l@Princeton.EDU
Subject: Telnet port 25
Can someone point me in the write direction as to how I would easily disallow telnet to port 25, but still allow telnet to port 23?
I.e. I don't want to be able to telnet to port 25 and send mail, but I still want to run sendmail, and allow telnet... or am I looking at this wrong? Thanks.
_____
CONFIDENTIALITY NOTICE: This email communication and any attachments may contain confidential and privileged information for the use of the designated recipients named above. If you are not the intended recipient, you are hereby notified that you have received this communication in error and that any review, disclosure, dissemination, distribution or copying of it or its contents is prohibited. If you have received this communication in error, please reply to the sender immediately or by telephone at (413) 794-0000 and destroy all copies of this communication and any attachments. For further information regarding Baystate Health System's privacy policy, please visit our Internet web site at http://www.baystatehealth.com.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:23 EDT