From: Faisal Qasim (faisalq@cyber.net.pk)
Date: Mon Oct 20 2003 - 04:32:16 EDT
Dear all,
We have AIX 4.3.3 on IBM F80, we need to add a 36.8 Ultra3 HDD, which will
required Ultra3 SCSI card. IBM CE says that since there are no bays
available, existing 03 HDDs needs to be moved to new SCSI card. This will
result in re-assignment of exising HDDs and data will not be available.
What should we do to make data on existing HDDs available after this
upgrade, without restoring the backup?
Thanks.
$ lscfg
INSTALLED RESOURCE LIST
The following resources are installed on the machine.
+/- = Added or deleted from Resource List.
* = Diagnostic support not available.
Model Architecture: chrp
Model Implementation: Multiple Processor, PCI bus
+ sysplanar0 00-00 System Planar
+ mem0 00-00 Memory
+ proc0 00-00 Processor
+ L2cache0 00-00 L2 Cache
* pmc0 00-00 Power Management Controller
* pci0 00-fff7f09000 PCI Bus
* isa0 10-80 ISA Bus
+ fda0 01-D1 Standard I/O Diskette Adapter
+ fd0 01-D1-00-00 Diskette Drive
* siokma0 01-K1 Keyboard/Mouse Adapter
+ sioka0 01-K1-00 Keyboard Adapter
+ kbd0 01-K1-00-00 PS/2 keyboard
+ sioma0 01-K1-01 Mouse Adapter
+ mouse0 01-K1-01-00 3 button mouse
+ ppa0 01-R1 CHRP IEEE1284 (ECP) Parallel Port
Adapter
+ lp0 01-R1-00-00 Other parallel printer
+ sa0 01-S1 Standard I/O Serial Port
+ tty0 01-S1-00-00 Asynchronous Terminal
+ sa1 01-S2 Standard I/O Serial Port
+ tty1 01-S2-00-00 Asynchronous Terminal
+ sa2 01-S3 Standard I/O Serial Port
+ tty2 01-S3-00-00 Asynchronous Terminal
+ sa3 01-S4 Standard I/O Serial Port
+ tty3 01-S4-00-00 Asynchronous Terminal
* pci2 10-58 PCI Bus
+ scsi0 11-08 Wide/Ultra-2 SCSI I/O Controller
+ rmt0 11-08-00-0,0 SCSI 4mm Tape Drive (12000 MB)
+ cd0 11-08-00-1,0 SCSI Multimedia CD-ROM Drive (650
MB)
+ scsi1 11-09 Wide/Ultra-2 SCSI I/O Controller
* pci3 10-5a PCI Bus
* pci4 10-5c PCI Bus
* pci5 10-5e PCI Bus
* pci1 00-fff7f0a000 PCI Bus
* pci6 20-58 PCI Bus
+ ent0 21-08 IBM 10/100 Mbps Ethernet PCI Adapter
(23100020)
* pci7 20-5a PCI Bus
* pci8 20-5c PCI Bus
* pci9 20-5e PCI Bus
+ mg20 2D-08 GXT130P Graphics Adapter
* pci10 20-60 PCI Bus
* pci11 20-62 PCI Bus
+ scsi2 34-08 Wide/Fast-20 SCSI I/O Controller
+ hdisk0 34-08-00-8,0 16 Bit LVD SCSI Disk Drive (9100 MB)
+ hdisk1 34-08-00-9,0 16 Bit LVD SCSI Disk Drive (18200
MB)
+ hdisk2 34-08-00-10,0 16 Bit LVD SCSI Disk Drive (18200
MB)
+ ses0 34-08-00-15,0 SCSI Enclosure Services Device
* pci12 20-64 PCI Bus
* pci13 20-66 PCI Bus
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:17 EDT