From: Green, Simon (Simon.Green@EU.ALTRIA.COM)
Date: Fri Aug 08 2003 - 05:37:56 EDT
Sorry; it's years since I used rs232 with HACMP: I use Target Mode SSA these
days.
If you don't get any help here, try the Yahoo! HACMP group; it's quite good.
Simon Green
Altria ITSC Europe Ltd
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l
<http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2> &r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
<http://www.faqs.org/faqs/aix-faq/>
N.B. Unsolicited email from vendors will not be appreciated.
-----Original Message-----
From: Shekhar Dhotre [mailto:Shekhar.Dhotre@LENDLEASEREI.COM]
Sent: 07 August 2003 21:05
To: aix-l@Princeton.EDU
Subject: Re: HACMP question
Sbodily/Green ,
Thanks for Support Matrix ...
I am testing tty connection for HACMP configuration but its not responding
to stty < /dev/tty0 command . Is there any other way to test ttty connection
between two nodes .
<SNIP>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:07 EDT