From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Fri May 30 2003 - 16:54:46 EDT
Did you select 2 target disks for the restore? You should not have to break
the mirror if you do that.
Kevin Adams
PacifiCare Behavioral Health
Principal Systems Analyst
AIX Certified Advanced Technical Expert
-----Original Message-----
From: Christian Lair [mailto:Christian_Lair@I2.COM]
Sent: Friday, May 30, 2003 11:38 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] mksysb restore "not enough disk space selected"
I'm trying to do a mksysb restore from a system with 2 18GB mirrored rootvg
drives to a new machine with 2 36GB drives. When the system boots from the
mksysb and starts the install it reports the following error:
"not enough disk space selected to contain os"
There has to be enough space on the new disk, its twice the size of the old
one. Has anyone else seen this or
know of a workaround?
Thanks,
Christian Lair
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:53 EDT