From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Tue May 13 2003 - 18:05:13 EDT
You might want to check out this redbook - AIX 4.3 to 5L Migration Guide:
http://publib-b.boulder.ibm.com/Redbooks.nsf/RedpieceAbstracts/sg246924.html
?Open
It's still a draft.
Kevin Adams
-----Original Message-----
From: Gipson, Mat [mailto:Mat.Gipson@AMERICREDIT.COM]
Sent: Tuesday, May 13, 2003 2:01 PM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] Migrating from 4.3.3 ML9 to 5.2
I ran into a similar issue on a 43P trying to migrate directly to 5.2. From
what I had been told by a friend who is a consultant for IBM was that I
needed to be at least at 4.3.3ML10 before trying to migrate directly to 5.2.
I have yet to test it but that is what I heard.
HTH,
Mathew Gipson
matt.gipson@americredit.com
817.525.7123
-----Original Message-----
From: Naylor, Jim [mailto:Jnaylor@SCHNUCKS.COM]
Sent: Tuesday, May 13, 2003 1:44 PM
To: aix-l@Princeton.EDU
Subject: Migrating from 4.3.3 ML9 to 5.2
Hello,
Has anyone had any problems migrating from AIX 4.3.3 ML9 o AIX 5.2. I have
tried it several times ant each time it just hangs up at around 67%
complete. I tried to a complete over wright to check out my CD's and it
went without a hitch. I get no errors at all. It just hangs. I am
installing on a 43P 150 with two 18 Gig disk drives mirrored and 512 Meg of
memory. As far as I could tell I did not have to go to AIX 5.1 first but I
am in the process of trying that now. Any advise would be appreciated.
Thanks,
Jim Naylor
Unix Systems Administrator
Schnuck Markets, Inc.
* Direct: (314) 994-4784
*)) Cell: (314) 691-0186
* Fax : (314) 994-4684
* jnaylor@schnucks.com
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:50 EDT