From: Green, Simon (Simon.Green@EU.ALTRIA.COM)
Date: Fri Apr 25 2003 - 11:36:05 EDT
That's what I would expect. But you can at least verify that all of the
disks are visible, and check device attributes like size and SSA serial
number.
Simon Green
Altria ITSC Europe s.a.r.l.
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will not be appreciated.
> -----Original Message-----
> From: John Jolet
> Sent: 25 April 2003 16:26
> To: aix-l@Princeton.EDU
> Subject: Re: hdisks missing
>
>
> when i've seen this with ssa, the hdisk and pdisks still show
> up, but if you try to allocate them, say to a raid group, you
> get a message that the device is fenced off.
>
> -----Original Message-----
> From: Green, Simon
> Sent: Friday, April 25, 2003 8:45 AM
> To: aix-l@Princeton.EDU
> Subject: Re: hdisks missing
>
>
> Are you sure this is correct? Sure: you can't actually do
> anything with
> disks which are reserved by another system, but I thought
> that cfgmgr would
> still configure both pdisk and hdisk. I haven't had a chance
> to test this,
> though.
>
> Simon Green
> Altria ITSC Europe s.a.r.l.
>
> AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
> AIX FAQ at http://www.faqs.org/faqs/aix-faq/
>
> N.B. Unsolicited email from vendors will not be appreciated.
>
> > -----Original Message-----
> > From: Bruce Zimmer
> >
> > Hdisks will not be configured if they are in use by another machine.
> > Yes you will need to varyoff the hdisks from the production node in
> > order for the failover machine to configure them. My
> > question would be,
> > How did you lose them in the first place. Simply shutting down and
> > restarting the node, the devices that were configured before, should
> > have stayed configured.
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:46 EDT