From: John Jolet (john.jolet@FXFN.COM)
Date: Fri Apr 25 2003 - 11:25:53 EDT
when i've seen this with ssa, the hdisk and pdisks still show up, but if you try to allocate them, say to a raid group, you get a message that the device is fenced off.
-----Original Message-----
From: Green, Simon [mailto:Simon.Green@EU.ALTRIA.COM]
Sent: Friday, April 25, 2003 8:45 AM
To: aix-l@Princeton.EDU
Subject: Re: hdisks missing
Are you sure this is correct? Sure: you can't actually do anything with
disks which are reserved by another system, but I thought that cfgmgr would
still configure both pdisk and hdisk. I haven't had a chance to test this,
though.
Simon Green
Altria ITSC Europe s.a.r.l.
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will not be appreciated.
> -----Original Message-----
> From: Bruce Zimmer
>
> Hdisks will not be configured if they are in use by another machine.
> Yes you will need to varyoff the hdisks from the production node in
> order for the failover machine to configure them. My
> question would be,
> How did you lose them in the first place. Simply shutting down and
> restarting the node, the devices that were configured before, should
> have stayed configured.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:46 EDT