Using the PCI Hot Plug Option

From: Rolando - Work (rmanaog@VIDEOTRON.NET)
Date: Mon Apr 14 2003 - 14:10:19 EDT

• Next message: Patrick B. O'Brien: "Re: Using the PCI Hot Plug Option"
• Previous message: MARLON BORBA: "Re: OpenSSH 3.4 on 5.2 can't connect when password expires"
• Next in thread: Patrick B. O'Brien: "Re: Using the PCI Hot Plug Option"
• Maybe reply: Patrick B. O'Brien: "Re: Using the PCI Hot Plug Option"
• Maybe reply: John Jolet: "Re: Using the PCI Hot Plug Option"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi everyone,

Has anyone ever installed a PCI hot pluggable device on a running system? Any pitfalls I shoud avoid? I have a 7026-H80 and I am planning on moving/installing two PCI 4-Channel Ultra3 SCSI RAID (Type 4-X) from a couple of B50s to an 726-H80.

Or should I avoid this completely and do the old and reliable way, bring down the system and install the adapters. I prefer shutting the system down and installing.

Your input is always greatly appreciated.

Regards,

Rolando Manaog

• Next message: Patrick B. O'Brien: "Re: Using the PCI Hot Plug Option"
• Previous message: MARLON BORBA: "Re: OpenSSH 3.4 on 5.2 can't connect when password expires"
• Next in thread: Patrick B. O'Brien: "Re: Using the PCI Hot Plug Option"
• Maybe reply: Patrick B. O'Brien: "Re: Using the PCI Hot Plug Option"
• Maybe reply: John Jolet: "Re: Using the PCI Hot Plug Option"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:44 EDT