From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Tue Jan 14 2003 - 14:43:58 EST
Never mind my last post. didn't read correctly.
Kevin Adams
-----Original Message-----
From: McHugh, Jerome [mailto:jmchugh@TOWERRECORDS.COM]
Sent: Tuesday, January 14, 2003 9:32 AM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] Best practice for 7133-D40 LED ID
The value is also used in the address of pdisk
BB02 is the value
# lsdev -C | grep pdisk0
pdisk0 Available 21-08-BB02-01-P SSA160 Physical Disk Drive
Jerry
Jerome McHugh
Senior Systems Administrator, Lead
-----Original Message-----
From: Wesley Joyce [mailto:wjoyce@UVI.EDU]
Sent: Tuesday, January 14, 2003 7:21 AM
To: aix-l@Princeton.EDU
Subject: Best practice for 7133-D40 LED ID
What is the best practice for setting the 4 char. LED on the 7133-D40?
The
"Installation Guide" states first two digits for rack number and last
two
digits for ID of 7133. Is it recommended to change it or leave at
factory
default?
Wesley Joyce, Systems Administrator
Center for Administrative Computing (CAC), IT
University of the Virgin Islands
#2 John Brewers Bay, St. Thomas, USVI 00802-9990
(340) 693-1469 (voice) / (340) 693-1465 (fax)
http://www.uvi.edu
"If you can't explain it simply, than you don't know it well enough. -
Unknown."
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:28 EDT