From: Wesley Joyce (wjoyce@UVI.EDU)
Date: Tue Jan 14 2003 - 10:20:41 EST
What is the best practice for setting the 4 char. LED on the 7133-D40? The
"Installation Guide" states first two digits for rack number and last two
digits for ID of 7133. Is it recommended to change it or leave at factory
default?
Wesley Joyce, Systems Administrator
Center for Administrative Computing (CAC), IT
University of the Virgin Islands
#2 John Brewers Bay, St. Thomas, USVI 00802-9990
(340) 693-1469 (voice) / (340) 693-1465 (fax)
http://www.uvi.edu
"If you can't explain it simply, than you don't know it well enough. -
Unknown."
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:28 EDT