From: Dave.Zarnoch@SUNGARD.COM
Date: Wed Nov 13 2002 - 08:04:38 EST
Well....
We are now having problems powering up the system so I will abandon
testing on this system and will be shifting over to an S80
Thanks to all who assisted:
Bill Verzal
Kevin Adams
Damir Delija
Justin Bleistein
Dave Zarnoch
UNIX Systems Engineer
SunGard eSourcing
600 Laurel Oak Rd.
Voorhees, NJ 08043
Dave.Zarnoch@sungard.com
Dave.Zarnoch@SUNG
ARD.COM To: aix-l@Princeton.EDU
Sent by: IBM AIX cc:
Discussion List Subject: Re: mksysb clone boot hanging (RESULT - still hanging)
<aix-l@Princeton.
EDU>
11/07/2002 03:19
PM
Please respond to
IBM AIX
Discussion List
Bill,
Wellllllll
Now I.m having trouble with the tape drive so I cannot supply the inittab
from tape.
I did see some CONSOLE error messages in errpt
I will try again on Monday to get more info
I will be out of the office until then
Thanks!
DaveZ
Bill Verzal
<Bill_Verzal@BCBS To:
aix-l@Princeton.EDU
IL.COM> cc:
Sent by: IBM AIX Subject: Re: mksysb clone
boot hanging (RESULT - still hanging)
Discussion List
<aix-l@Princeton.
EDU>
11/07/2002 08:47
AM
Please respond to
IBM AIX
Discussion List
I'd saw back into maintenance mode and check inittab. Post it if you are
able.
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
Dave.Zarnoch@S
UNGARD.COM To: aix-l@Princeton.EDU
Sent by: "IBM cc:
AIX Discussion Subject: Re: mksysb clone boot
hanging (RESULT - still hanging)
List"
<aix-l@Princet
on.EDU>
11/07/2002
06:38 AM
Please respond
to "IBM AIX
Discussion
List"
The LED display is black
DaveZ
Bill Verzal
<Bill_Verzal@BCBS To:
aix-l@Princeton.EDU
IL.COM> cc:
Sent by: IBM AIX Subject: Re: mksysb clone
boot hanging (RESULT - still hanging)
Discussion List
<aix-l@Princeton.
EDU>
11/06/2002 04:49
PM
Please respond to
IBM AIX
Discussion List
NFS starts after the TCPIP starts. Got a LED display ?
BV
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
Dave.Zarnoch@S
UNGARD.COM To: aix-l@Princeton.EDU
Sent by: "IBM cc:
AIX Discussion Subject: Re: mksysb clone boot
hanging (RESULT - still hanging)
List"
<aix-l@Princet
on.EDU>
11/06/2002
02:39 PM
Please respond
to "IBM AIX
Discussion
List"
Bill,
Thanks!
This got rid of the "ctrmc" message
Now the system is hung at:
0513-059 The hostmibd Subsystem has been started. Subsystem PID is 5452.
6 Nov 07:03:47 ntpdate[4508]: can't find host ntp-server
6 Nov 07:03:47 ntpdate[4508]: no servers can be used, exiting
Finished starting tcpip daemons.
What next?
Thanks!
DaveZ
Bill Verzal
<Bill_Verzal@BCBS To:
aix-l@Princeton.EDU
IL.COM> cc:
Sent by: IBM AIX Subject: Re: mksysb clone
boot hanging
Discussion List
<aix-l@Princeton.
EDU>
11/06/2002 11:00
AM
Please respond to
IBM AIX
Discussion List
The ctrmc is a cluster fileset that the Regatta's use. I suggest you boot
into maintenance mode and remove the filesets.
root-siebddb:/>lssrc -a|grep -i rsct
ctrmc rsct 11876 active
ctcas rsct 14214 active
IBM.ServiceRM rsct_rm 12398 active
IBM.CSMAgentRM rsct_rm 14966 active
IBM.ERRM rsct_rm 14708 active
IBM.AuditRM rsct_rm 13960 active
BV
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
Dave.Zarnoch@S
UNGARD.COM To: aix-l@Princeton.EDU
Sent by: "IBM cc:
AIX Discussion Subject: mksysb clone boot
hanging
List"
<aix-l@Princet
on.EDU>
11/06/2002
09:32 AM
Please respond
to "IBM AIX
Discussion
List"
Folks,
I have been searching the FAQs and archives but was unable to find any
pertinent info
I am attempting to clone a P690 LPAR mksysb onto a RS6000 7013(595) JSERIES
server
Everything went OK but it is hanging at this point:
Saving Base Customize Data to boot disk
Starting the sync daemon
Starting the error daemon
System initialization completed.
0513-059 The syslogd Subsystem has been started. Subsystem PID is 1970.
0513-059 The sendmail Subsystem has been started. Subsystem PID is 4156.
0513-059 The inetd Subsystem has been started. Subsystem PID is 6972.
0513-059 The hostmibd Subsystem has been started. Subsystem PID is 5452.
6 Nov 07:03:47 ntpdate[4508]: can't find host ntp-server
6 Nov 07:03:47 ntpdate[4508]: no servers can be used, exiting
Finished starting tcpip daemons.
0513-059 The ctrmc Subsystem has been started. Subsystem PID is 3382.
No login
I have disconnected the ethernet cables
Any help?
Thanks!
Dave Zarnoch
UNIX Systems Engineer
SunGard eSourcing
600 Laurel Oak Rd.
Voorhees, NJ 08043
Dave.Zarnoch@sungard.com
(800)441-1181
**********
The information contained in this communication is confidential, private,
proprietary, or otherwise privileged and is intended only for the use of
the addressee. Unauthorized use, disclosure, distribution or copying is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify the sender immediately at (312)
653-6000.
**********
**********
The information contained in this communication is confidential, private,
proprietary, or otherwise privileged and is intended only for the use of
the addressee. Unauthorized use, disclosure, distribution or copying is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify the sender immediately at (312)
653-6000.
**********
**********
The information contained in this communication is confidential, private,
proprietary, or otherwise privileged and is intended only for the use of
the addressee. Unauthorized use, disclosure, distribution or copying is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify the sender immediately at (312)
653-6000.
**********
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:19 EDT