From: Michelle DeVault (adsmigmo@YAHOO.COM)
Date: Wed Oct 23 2002 - 09:35:19 EDT
Apparently so, but wouldn't there be a point when the
room temp increases enough that the temp probes in the
system would record an increase? Was just wondering
how dang hot it has to be in the room before that
happens, and will my other servers crash before that
point.
--- Holger.VanKoll@SWISSCOM.COM wrote:
> doesnt fan-speed increase when temperature goes up
> to keep temperature
> within the system the same?
>
>
> -----Original Message-----
> From: Michelle DeVault [mailto:adsmigmo@YAHOO.COM]
> Sent: Tuesday, October 22, 2002 9:57 PM
> To: aix-l@Princeton.EDU
> Subject: use uesensor -l to record temperature
>
>
> I've been periodically recording temperatures using
> two of my M80's uesensor command. The temperature
> readings off of these two boxes do not fluctuate at
> all. Today we had the cpu room AC worked on, so I
> *know* the temp of the room was a little higher than
> usual (anywhere from 5-10 degrees higher), but the
> temps recorded using uesensor during this time were
> *exactly* the same as they have always been.
>
> I would like to use these commands in a script that
> would notify me during off hours if the temperature
> of
> the cpu room goes up too high (we had the AC unit go
> out several months ago, and one of our older servers
> overheated and decided to go down). What kind of
> room temperature
> variance has to occur before the temp probes used by
> uesensor will
> notice? Makes me think that these temp numbers are
> hardcoded somewhere
> .....
>
> __________________________________________________
> Do you Yahoo!?
> Y! Web Hosting - Let the expert host your web site
> http://webhosting.yahoo.com/
__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:16 EDT