From: Holger.VanKoll@SWISSCOM.COM
Date: Wed Oct 23 2002 - 05:22:07 EDT
doesnt fan-speed increase when temperature goes up to keep temperature
within the system the same?
-----Original Message-----
From: Michelle DeVault [mailto:adsmigmo@YAHOO.COM]
Sent: Tuesday, October 22, 2002 9:57 PM
To: aix-l@Princeton.EDU
Subject: use uesensor -l to record temperature
I've been periodically recording temperatures using
two of my M80's uesensor command. The temperature
readings off of these two boxes do not fluctuate at
all. Today we had the cpu room AC worked on, so I
*know* the temp of the room was a little higher than
usual (anywhere from 5-10 degrees higher), but the
temps recorded using uesensor during this time were
*exactly* the same as they have always been.
I would like to use these commands in a script that
would notify me during off hours if the temperature of
the cpu room goes up too high (we had the AC unit go
out several months ago, and one of our older servers
overheated and decided to go down). What kind of room temperature
variance has to occur before the temp probes used by uesensor will
notice? Makes me think that these temp numbers are hardcoded somewhere
.....
__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:16 EDT