From: Bob.Kelley@BRINKSINC.COM
Date: Thu May 13 2004 - 18:09:55 EDT
Anybody seen anything similiar to this or have any insight? Help much
appreciated on this!
After a 5.1->5.2 upgrade, I found that I cannot import the volume group
which resides on a CX600 LUN. I have flashed the fcX adapters with the
latest microcode, andh here are the EMC software versions:
PowerPath 3.0.4.0
NaviAgent 6.2.0.6
CLArray 5.2.0.7
This is the error I'm getting:
[root@nad0019aixd05/home/root]# importvg -y oraclevg hdiskpower0
0516-024 lqueryvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-024 lqueryvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-1140 importvg: Unable to read the volume group descriptor area
on specified physical volume.
powermt display dev=all shows this:
Pseudo name=hdiskpower0
CLARiiON ID=APM00023800314
Logical device ID=600601F86D0A00007A865AF0B555D711
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats
--- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 0 fscsi0 hdisk3 SP A3 active alive 0 0 1 fscsi1 hdisk5 SP B3 active alive 0 0 I also noticed something peculiar, I have the LUNZ devices showing up now: hdisk0 Available 10-60-00-10,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 10-60-00-11,0 16 Bit LVD SCSI Disk Drive hdisk2 Available 20-58-01 FC CLArray LUNZ Disk hdisk3 Available 20-58-01 FC CLArray RAID 5 Disk Group hdisk4 Available 20-60-01 FC CLArray LUNZ Disk hdisk5 Available 20-60-01 FC CLArray RAID 5 Disk Group hdiskpower0 Available 20-58-01 PowerPath Device Bobby Kelley Jr. 972-877-5341
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:55 EDT