From: Mark Lamport (Mark.Lamport@KCMETRO.EDU)
Date: Wed Apr 28 2004 - 11:13:39 EDT
I tried adding a static route with the interface option and found it works
sometimes. I think it is because there are 2 routes.
thanks.
----- Original Message -----
From: <Holger.VanKoll@SWISSCOM.COM>
Newsgroups: bit.listserv.aix-l
To: <aix-l@Princeton.EDU>
Sent: Wednesday, April 28, 2004 9:53 AM
Subject: Re: AIX routing
> how do you want aix to decide which interface to take?
>
> every route has a destination (a choose this route if...) and a
> interface which is connected to the gateway for this destinatio
>
> -----Original Message-----
> From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
> Mark Lamport
> Sent: Wednesday, April 28, 2004 2:55 PM
> To: aix-l@Princeton.EDU
> Subject: AIX routing
>
> I have a RS/6000 with 3 interfaces, one of which is connected to a
> firewall.
> It appears all AIX routing is performed by destination ip address. Is
> there
> a way to perform routing by interface? I have tried the smit route but
> appears only to add another entry in the routing table for the
> destination
> addess.
>
> thanks.
>
> Mark Lamport
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:52 EDT