From: cuihh cuihh (cuihh6@HOTMAIL.COM)
Date: Fri Apr 02 2004 - 10:04:33 EST
7133-D40 , a raid10 array was built on it (select "pdisk0,pdisk1,pdisk2" as
the primary disks and "pdisk3 pdisk4 pdisk5" as
the secondary disks)
In "Advanced SerialRAID Adapters user's guide and maintanence information"
Page 36, the following description about
the raid10 array can be seen :
Configuration information of the array is held in a reserved area sector on
each of the
first three member disk drives of the array. If fewer than two of these
sectors can be
read or written, the array normally goes into the Offline state.
What is configuration information ?
In my raid10 array mentioned above, which disks hold the configuration
information ?
Thanks in advance.
_________________________________________________________________
Ãâ·ÑÏÂÔØ MSN Explorer: http://explorer.msn.com/lccn/
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:48 EDT