From: Mark Lamport (lamport@KCMETRO.CC.MO.US)
Date: Mon Jun 17 2002 - 09:16:47 EDT
I have raid 10 setup with 2 6230 adapters with fast write cache. You can
have multiple raid arrays on one loop but you cannot have multiple loops. I
set mine up having one D40 drawer mirror another and set up a hot spare in
each drawer.
----- Original Message -----
From: "Green, Simon" <SGreen@KRAFTEUROPE.COM>
Newsgroups: bit.listserv.aix-l
To: <aix-l@Princeton.EDU>
Sent: Monday, June 17, 2002 4:55 AM
Subject: Re: RAID 10
> If you do your mirroring through LVM, this is possible.
>
> Simon Green
> Philip Morris ITSC Europe
>
> AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
> AIX FAQ at http://www.faqs.org/faqs/aix-faq/
>
> N.B. Unsolicited email from vendors will seldom be appreciated.
>
> > -----Original Message-----
> > From: Raj Atwal [mailto:tatwal@YAHOO.COM]
> > Sent: 17 June 2002 03:40
> > To: aix-l@Princeton.EDU
> > Subject: RAID 10
> >
> >
> > Is it possible to configure hardware RAID 10 over 2
> > SSA loops. I have been told that this is not a valid
> > configuration for RAID 10. For instance to have the
> > primary copy over loop A and the secondary copy over
> > loop B. Appreciate any information.
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:15:59 EDT