add disk failure

From: Christian Wessely (christian.wessely@uni-graz.at)
Date: Thu Jul 07 2005 - 06:46:12 EDT

• Next message: Maglinger, Paul: "Looking for method to scan for bad blocks."
• Previous message: Dr. Martin Körfer: "StorageWorks-Warning"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello Admin Wizards,

after trying to add a DS-RZ1FC-VW Disk in my SW300 storage shelf (HSZ40
- DEC Alpha Server 1000/366, True64 4.0g) i got the following message:

HSZ_UNTEN > add disk DISK510 5 1 0

HSZterm: No sense data available.
HSZterm: ASC = 0, ASQ = 0.

HSZterm: No sense data available.
HSZterm: ASC = 0, ASQ = 0.

HSZterm: No sense data available.
HSZterm: ASC = 0, ASQ = 0.

Warning 9030: Cannot determine if the correct device type is at the PTL
               specified
Temperature within optimum limit.
SWAP signal cleared - all SWAP interrupts re-enabled
HSZ_UNTEN >

The disk drive´s amber LED blinks.
Does that mean the disk is useless for this environment?

Thanks for a short reply

CW

• Next message: Maglinger, Paul: "Looking for method to scan for bad blocks."
• Previous message: Dr. Martin Körfer: "StorageWorks-Warning"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:21 EDT