From: Browett, Darren (dbrowett@coquitlam.ca)
Date: Tue Sep 14 2004 - 19:35:39 EDT
We are doing some re-configurations on our network, and one of things is
re-assigning ip addresses for our printers. This could happen at
anytime.
Is there a way to assign two different IP addresses to a printer in
/etc/printcap, such that when we issue
an lpr command it will go to the printer ip address that is active.
I checked the man page but I couldn't find anything that addressed this
issue.
Thanks
Darren
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:08 EDT