From: Yogesh Bhanu (yogesh@gsf.de)
Date: Thu Aug 12 2004 - 14:39:52 EDT
Hello Gurus ,
We had to do a shut-down of our wildfire system , which is split
into 3 hard partitions . Now we are trying to get the system back ..
But unfortunately the partition0 refuses to come to console prompt .
I have tried a different port on the console server and even
tried to plug my laptops serial port to the serial port of this partition.
But I get no output .
I had shut-down the system by dropping to scm level and issuing "power off -all"
after I had made sure all partitions were at "P0>>"
any pointers to solve be great will be great .
Thanks in advance
yogesh
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:06 EDT