From: Andre.van.Benthem@achmea.nl
Date: Fri Jul 09 2004 - 07:10:58 EDT
Dear managers,
We are going to upgrade to 5.1B.
I noticed the following warnings:
isp0 at pci0 slot 1
isp_read_nvram: Warning, invalid NVRAM, using driver defaults ID set to 7
isp0: QLOGIC ISP1040B/V2
isp0: Firmware revision 5.57 (loaded by console)
isp0: Fast RAM timing enabled.
scsi0 at isp0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0) (COMPAQ BB00921B91 3BS8)
(Wide16)
...
..
isp2 at pci8 slot 1
isp_read_nvram: Warning, invalid NVRAM, using driver defaults ID set to 7
isp2: QLOGIC ISP1040B/V2
isp2: Firmware revision 5.57 (loaded by console)
isp2: Fast RAM timing enabled.
scsi4 at isp2 slot 0
rz32 at scsi4 target 0 lun 0 (LID=43) (COMPAQ BB00923468 3B07)
(Wide16)
emx1 at pci8 slot 3
The rz32 is our system-disk and till today we had no problems with this
warning on 4.0G.
Could this warning be a probem if we are going to upgrade from 4.0G -> 5.1
-> to 5.1B ?
TIA
Regards A. van Benthem
********************* DISCLAIMER *********************
De informatie in dit e-mail bericht is uitsluitend
bestemd voor de geadresseerde. Verstrekking aan
en gebruik door anderen is niet toegestaan.
Door de electronische verzending van het bericht
kunnen er geen rechten worden ontleend aan de
informatie.
************************************************************
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:03 EDT