From: Andre.van.Benthem@achmea.nl
Date: Thu Jun 17 2004 - 10:49:18 EDT
Dear managers,
After upgrading from version 5.1 PK6 to 5.1B we had the problem that we
could not boot from /vmunix.
Booting from genvmunix was no problem.
We also could build successfully a new kernel, but after moving it to
/vmunix and trying to boot from it, it went wrong.
( see below)
As a test I copied /vmunix to /andre ( booted from genvmunix) and tried to
boot from /andre and to my surprise the system came up with no problems.
Does anyone have an idea why booting from /vmunix does not work ?
The upgrade path: 4.0G PK3 -> 5.1 -> 5.1 PK6 -> 5.1B
.................
.................
can't open vmunix
trying /etc/sysconfigtab.34
Loading /etc/sysconfigtab.34 ...
Loading at fffffc0000250000
Linking 158 objects: 158 Can't open /sys/BINARY/TSUNAMI.mod
halted CPU 0
halt code = 5
HALT instruction executed
PC = 20010510
P00>>>
P00>>>set boot_file andre
P00>>>b
waiting for pzb0.0.0.2004.0 to start...
waiting for pza0.0.0.2004.1 to start...
(boot dza537.0.0.2004.1 -file andre -flags A)
block 0 of dza537.0.0.2004.1 is a valid boot block
reading 19 blocks from dza537.0.0.2004.1
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 2600(9728)
initializing HWRPB at 2000
initializing page table at 3fd56000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
waiting for pza0.0.0.2004.1 to start...
UNIX boot - Wednesday October 16, 2002
waiting for pza0.0.0.2004.1 to start...
Loading andre ...
Loading at 0xfffffc0000230000
....
...
Regards A. van Benthem
********************* DISCLAIMER *********************
De informatie in dit e-mail bericht is uitsluitend
bestemd voor de geadresseerde. Verstrekking aan
en gebruik door anderen is niet toegestaan.
Door de electronische verzending van het bericht
kunnen er geen rechten worden ontleend aan de
informatie.
************************************************************
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:01 EDT