From: Bjorn S. Nilsson (nilsson@nbi.dk)
Date: Mon Jun 14 2004 - 07:15:25 EDT
Dear Managers,
A little more than an hour ago I asked:
>I am testing a HP SuperDLT, identified as COMPAQ SDLT320, on a Tru64
>UNIX V4.0G system. vdump writes correctly to the tape, but when
>finished the tape is unloaded, and the log has a message
>
>unmapped scsi density code (0x49) - DDR entry needed
>
>The highest entry I can find in a /etc/ddr.dbase file is for a Tru64
>5.1 system:
> scsi_tape_density[0x48] = "131000_bpi" 131000 0
>
>Can anybody help with the corresponding entry for code 0x49 ?
and within minutes I had answers from
Fred N. van Kempen <fred@microwalt.nl>
Olle Eriksson <olle@cb.uu.se>
Johan Brusche <johan.brusche@hp.com>
Edit ddr.dbase as follows
scsi_density_table_size = 0x4a
scsi_tape_density[0x49] = "190000_bpi" 190000 0
then use ddr_config command to compile new /etc/dbase
which, needless to say, solved my problem immediately. Thanks to
everybody!
/Bjorn
====================================================================
Bjorn S. Nilsson Email: Bjorn.S.Nilsson@nbi.dk
Niels Bohr Institute or just nilsson@nbi.dk
Blegdamsvej 17 Phone: +45 35325283
DK-2100 Copenhagen CellPhone: +45 28755283
Denmark Fax: +45 35325016
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:50:01 EDT