SUMMARY(partial): 5.1A won't boot on PWS600au

From: Tom Linden (tom@kednos.com)
Date: Wed May 26 2004 - 14:29:55 EDT

Next message: McCracken, Denise: "System won't boot serial console"
Previous message: Tom Linden: "5.1A won't boot on PWS600au"
In reply to: Tom Linden: "5.1A won't boot on PWS600au"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

V6.5 FW doesn't have the necessary update file for the Miata GL,
but v6.3 does, didn't try 6.4

  -----Original Message-----
  From: tru64-unix-managers-owner@ornl.gov
  [mailto:tru64-unix-managers-owner@ornl.gov]On Behalf Of Tom Linden
  Sent: Wednesday, May 26, 2004 9:04 AM
  To: Tru64
  Subject: 5.1A won't boot on PWS600au


  Two problem, actually, it wouldn't boot, and since I had it down
  decided to update the firmware

  First prtoblem: Using Firmware update v6.5

  The default bootfile for this platform is

          [ARCHIVE]NOFILE.EXE

  Hit <RETURN> at the prompt to use the default bootfile.

  Bootfile:
  %APB-I-FILENOTLOC, Unable to locate NOFILE.EXE
  %APB-I-LOADFAIL, Failed to load secondary bootstrap, status = 00000910

  halted CPU 0

  halt code = 5
  HALT instruction executed
  PC = 20003d10
  warning -- HWRPB is invalid.
>>>

  Second Problem:

  It goes through the usual booting sequence ending with

  exec: /sbin/mount_advfs -F 0x4000 usr_domain#usr /usr

  trap: invalid memory read access from kernel mode

      faulting virtual address: 0x00000000000004b0
      pc of faulting instruction: 0xfffffc00002cdc70
      ra contents at time of fault: 0xfffffc000038d4c0
      sp contents at time of fault: 0xfffffe0409c8efe0

  panic (cpu 0): kernel memory fault
  syncing disks... done

  DUMP: blocks available: 786432
  DUMP: blocks wanted: 15154 (partial compressed dump) [OKAY]
  DUMP: Device Disk Blocks Available
  DUMP: ------ ---------------------
  DUMP: 0x1300013 593919 - 786429 (of 786430) [primary swap]
  DUMP.prom: Open: dev 0x5100001, block 786432: SCSI 0 1004 0 0 0 0 0
  DUMP: Writing header... [1024 bytes at dev 0x1300013, block 786430]
  DUMP: Writing data. [1MB]
  DUMP: Writing header... [1024 bytes at dev 0x1300013, block 786430]
  DUMP: crash dump complete.

  halted CPU 0

  halt code = 5
  HALT instruction executed
  PC = fffffc000052abb0

  the LEDs are at this time

  1 1 1 0
  0 1 0 0

  where 1 is on

  Drive gone bad?

  Tom


  ---
  Outgoing mail is certified Virus Free.
  Checked by AVG anti-virus system (http://www.grisoft.com).
  Version: 6.0.680 / Virus Database: 442 - Release Date: 5/9/2004

  ---
  Incoming mail is certified Virus Free.
  Checked by AVG anti-virus system (http://www.grisoft.com).
  Version: 6.0.680 / Virus Database: 442 - Release Date: 5/9/2004

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.680 / Virus Database: 442 - Release Date: 5/9/2004

Next message: McCracken, Denise: "System won't boot serial console"
Previous message: Tom Linden: "5.1A won't boot on PWS600au"
In reply to: Tom Linden: "5.1A won't boot on PWS600au"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:59 EDT