FastFD mode on tu cards not working?

From: Bütow, Michael (michael.buetow@comsoft.de)
Date: Wed May 05 2004 - 03:31:35 EDT

• Next message: Andrew Raine: "SUMMARY: gnu-R for Tru64 5.1 pk3"
• Previous message: Jane Caldwell-Myers: "Help: KZPBA card configuration: System cannot see device"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello all,

A colleague of mine has had problems not being able to
use tu Ethernet interfaces in full duplex mode on DS10.

He reported setting the interfaces (onboard and on an
interface card, but all Tulip chipset) to FastFD on the
SRM console.
The operating system (Tru64 v4.0F) reports these cards
as full duplex.
However, he tried connecting with two different switches
and was able to get 100Mb/s, but NOT full duplex.

Is this a known / verified problem?

Best regards,
Michael

• Next message: Andrew Raine: "SUMMARY: gnu-R for Tru64 5.1 pk3"
• Previous message: Jane Caldwell-Myers: "Help: KZPBA card configuration: System cannot see device"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:58 EDT