From: Bhattacharya Dhritiman \(ext\) (Dhritiman.Bhattacharya.ext@ts.siemens.de)
Date: Fri Apr 23 2004 - 04:03:41 EDT
Hi Managers,
I am having some problems while configuring a TRU64 host as an IP router.
We have a Cluster [TruCluster 5.1A, with Tru64 5.1A ] having two interface
[one for a 129.* and another to 192.168*]. The private network is accessible
only to the cluster no other 129.* machines.
However now the requirements become that a few of the private networked
hosts should be accessible from a set of hosts [say HOST1, HOST2 both TRU64
4.0] other than the Cluster.
So I have to use the Cluster as the IP router for the private network from
129.* domain.
I have set the "iprsetup -s ee2" ee2 is connected to the private network in
the cluster member HOSTA.
And I have also done a "rcmgr set ROUTER yes" and restarted the gated
service.
But still the routing is not working from the HOST1 or HOST2.
[I have added the route for the 192.168/24 network to HOST1 & HOST2 with
gateway as CLUSTER_OF_HOSTA].
However I can ping the private ip of HOSTA & the other cluster member, but
not anyother private IPs. Did I miss something, or have I done something
wrong ??? Please suggest.
Regards,
Dhritiman Bhattacharya
Tata Consultancy Services Deutschland Gmbh
Currently at:
SIEMENS Transportation Systems
TS RA D OC
Tel +49 531 226-5059
Fax +49 531 226-4477
mailto:Dhritiman.Bhattacharya.ext@ts.siemens.de
Note:
This e-mail may contain privileged, undisclosed or otherwise confidential
information.
If you have received this e-mail in error, you are hereby notified that any
review,
copying or distribution of it is strictly prohibited. Please inform the
sender immediately and destroy the original transmittal.
Thank you for your understanding
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:57 EDT