From: Wolfgang.Rupp@mm-packaging.com
Date: Wed Feb 18 2004 - 03:14:07 EST
Problem: I added two identical disks. Then I did:
run config
add mirr18 diskX diskY
init mirr18
- the console prompt stops for a few seconds, returns
BUT it seems the init does nothing.
sho mirr18 does not show any change at all.
"add unit d55 mirr18 dis=all" gives:
Error 9310: container metadata check failed, unit not created.
When I try to create partitions, I get:
Error 8020 "No metadata found on container. An INIT MIRR
must be issued before this container may be used".
What's wrong? Or what do I do wrong?
Wolfgang Rupp
Unix & Storage Systems
MM Packaging Europe GmbH
Floragasse 7
A-1040 Wien
Tel: +43 1 50257 238
Fax: +43 1 50257 260
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:51 EDT