stair stepping on Jet Direct

From: Brehl, Blake (Blake.Brehl@anritsu.com)
Date: Fri Nov 14 2003 - 14:06:26 EST

• Next message: Kevin C McCarty: "what the list said"
• Previous message: Kevin C McCarty: "Thanks"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

Below is the printcap entry. There previously was an Osicom print server to
an HP8150, it was replaced by a 5Si with a JetDirect card. It is now stair
stepping when performing the lpr -P rlp180 $somefilename command, worked
fine before. Is there something in the printcap that can correct this?

rlp180|lp180|180:\
        :lf=/usr/adm/lp180err:\
        :lp=:\
        :rm=rlp180:\
        :rp=PORT1:\
        :sd=/usr/spool/lpd180:

Tru64UNIX V5.1A pk4

Best Regards,

Blake Brehl
Sys Admin/DBA
Anritsu Company United States
Morgan Hill, CA

• Next message: Kevin C McCarty: "what the list said"
• Previous message: Kevin C McCarty: "Thanks"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:44 EDT