From: KYLAM Tru64 (lamkaiyeung@hotmail.com)
Date: Sun Aug 17 2003 - 22:42:46 EDT
Hi All,
Thank you very much for all your responses especially to Dr Thomas.Blinn & Chris Ruhnke who instructed me to solve the problem. Here quoted Tom's solution for your reference:
(as root)
rm -rf /usr/sys/HOSTNAME (get rid of the old build directory)
rm /usr/sys/conf/HOSTNAME (and the old config file)
doconfig (with no arguments)
(edit the file if you need to)
then boot the new kernel.
Thanks,
KYLAM
>>>>>>>>>>>>>>>>>>>>> Original post
Hi Managers,
I've backup all the files from Alphaserver DS20E and restore the whole image to A1000. After reconfiguring the hardware dependent files (e.g. /etc/dec_*, sysconfigtab) and rebuilding the kernel. (I've typed dn_setup -init, dsfmgr -K, dsfmgr -V -F -v)
The system can't be booted with following messages: (copy from screen)
=======================================================================
panic (CPU0): configure_platform not implemented on this platform
DUMP : Will attempt to compress 25600000 bytes of dump
: into 473079792 bytes of memory
DUMP : Dump to 0x200005. .. : End 0x20005
succeeded
CP - SAVE_TERM routine to be called
CP - SAVE_TERM exited with hlt_req =1, r0=00000000, 00000000
halted CPU0
halt code=5
HALT instruction executed
PC=fffffc00005e9500
>>>
=======================================================================
I've rebuild the kernel for 3 times already...
Could you please give me more hints on it?? Thanks.
Regards,
KYLAM
_________________________________________________________________
Linguaphone : 學英語，免費學日語 http://go.msnserver.com/HK/30475.asp
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:31 EDT