From: Kevin Raubenolt (raubenol@ohio.edu)
Date: Fri Aug 08 2003 - 13:40:40 EDT
After many days with tech support we have Legato working with our ESL9198
library. The steps we did:
ESL9198 checks
Vendor ID
Serial Number
IEEE Number
Serialization Enabled
# Drives
# bins
Model Number
Cable robot controller to be on bus 0 or NSR
NSR m2402
upgraded firmware 4.03.21
Changed mapping from 'auto indexed' to 'indexed'
- created custom map to put AF CTRL at LUN 0, CHGR at LUN 1
Then rebooted our Alpha, Bill Gates troubleshooting, and everything worked.
We upgrade the NSR and changed our map in one step combined with the reboot
and the system worked.
Kevin
--On Tuesday, August 05, 2003 2:54 PM -0400 Kevin Raubenolt
<raubenol@ohio.edu> wrote:
>
> Has anyone upgraded their ESL9198 library to the 5MB memory option and FW
> 3.40? I am most interested in those using Legato has their backup
> software. We have done this and have tons of problems with Legato
> communicating with our ESL library. I changed the VENDOR ID as FW 3.40
> release notes specify with no success. Any input on the 5MB 3.40 FW
> upgrade would be great!
>
> Thanks.
>
> Kevin Raubenolt Network Engineer
> Ohio University Communication Network Services
> -------------------------------------------------------
> My PGPKEY: http://oak.cats.ohiou.edu/~raubenol/pgp.html
> or http://pgpkeys.mit.edu/ search: raubenol
Kevin Raubenolt Network Engineer
Ohio University Communication Network Services
-------------------------------------------------------
My PGPKEY: http://oak.cats.ohiou.edu/~raubenol/pgp.html
or http://pgpkeys.mit.edu/ search: raubenol
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:30 EDT