From: Colin Bull (c.bull@videonetworks.com)
Date: Tue Jul 29 2003 - 07:02:34 EDT
Tru64 5.1A - DS20e 2 node cluster.
Our hardware supplier upgraded the firmware on our HSG80s last week.
We did this without shutting down to be clever.
I have tried to reboot one server and it is refusing to come up
with the following error.
# exit
Enter run level (0-9, s or S): 3
INIT: New run level: 3
Checking device naming:
Local Status: ldev or cdev is zero:
ldev cdev hw_id bn_id dn_id typ old_name new_name
C: 0 130084d 269 147 16 c "" ~
...... loads of similar snipped
C: 0 1300860 269 147 15 c "" ~
Errors: Cluster 0 Local 20 Cluster/Local 0 Total: 20
bcheckrc: Device Naming failed initial check.
Correct errors and then continue or reboot.
INIT: SINGLE-USER MODE
Doing a show this and show connect on the controllers does not
show anything untoward. Any suggestions?
Colin Bull
c.bull@videonetworks.com
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:29 EDT