From: Sathiamoorthy Balasubramaniyan \(ext_TCS\) (Balasubramaniyan.Sathiamoorthy.ext_TCS@ts.siemens.de)
Date: Wed Jul 23 2003 - 15:22:38 EDT
Thanks much to all those who've responded.
Summary:
The disk can be replaced online (w/o shutdown) and volrecover will start
automatically after initializing the disk.
Apologies for the late summary.
Bala S
> -----Original Message-----
> From: Sathiamoorthy Balasubramaniyan (ext_TCS)
> Sent: Friday, July 18, 2003 3:02 PM
> To: Tru64 List (E-mail)
> Subject: Changing the bad disk of LSM
>
> Hi,
> A question on replacing a defect disk.
>
> Operating System: OSF 4.0F
>
> I have LSM in system disk. One of the disks holding the mirrored volume is
> defective.
> There are two plexes in that volume and one is disabled due to this.
>
> I have the procedure to replace the disk, but I want to know few things:
>
> 1. Can I do this online, when system is using that domain ?
> or
> Should I need to deactivate and unmount the filesystem of the advfs
> domain associated with this disk group and volume.
>
> 2. After performing the task of removing the failed disk from the disk
> group, initializing and adding the new disk, I need to run volrecover
> command to resynchronize the disk.
> My question is:
> Will advfs domain be available after adding the disk so users can start
> accessing the file system while volrecover runs in the background.
>
> Thanks a lot,
> Regards,
>
>
> Balasubramaniyan Sathiamoorthy
> Tata Consultancy Services Deutschland Gmbh
> Currently at:
> SIEMENS Transportation Systems
> TS RA D OC
> Tel +49 531 226-6154
> Fax +49 531 226-4477
> mailto:Balasubramaniyan.Sathiamoorthy.ext_TCS@ts.siemens.de
>
> Note: This e-mail may contain privileged, undisclosed or otherwise
> confidential information.
> If you have received this e-mail in error, you are hereby notified that
> any review, copying or distribution
> of it is strictly prohibited. Please inform the sender immediately and
> destroy the original transmittal.
> Thank you for your understanding
>
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:28 EDT