How to set SRM parameter permanently

From: Liang, Warren (Warren.Liang@sms-ito.com)
Date: Mon Jun 16 2003 - 18:57:35 EDT

• Next message: Daniel Clar: "SUMMARY : Problem with a backup disk"
• Previous message: McCracken, Denise: "Using CDrecord from NHD5, Tru64 5.1a"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

I have an Alpha 4100 with SVGA controller installed. The SRM parameter
"console" is defined as "graphics". I would like to use a VT terminal as the
console device. How do I change the setting to "serial" permanently? After
"p000> set console serial" and "p000> init", if I recycle the power, does
the setting remain as "serial"?

In the meantime, I like to keep the SVGA/keyboard/mouse plugging in as-is as
the backup.

Thanks in advance.

AlphaServer 4100 5/533
Firmware version: 5.5
PALcode: Digital UNIX version 1.23

Warren

• Next message: Daniel Clar: "SUMMARY : Problem with a backup disk"
• Previous message: McCracken, Denise: "Using CDrecord from NHD5, Tru64 5.1a"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:23 EDT