From: Carl Dickhaus (SYSTEM@XAVIER.XU.EDU)
Date: Mon Jun 09 2003 - 16:45:02 EDT
I have an AS4000 Tru64 V4.0d as a dedicated application server.
(Yes it is old, but we are limited by requirements of the
application provider.)
It is a production server.
It has a KZPSC-XA controller driving a 6 disk RAID5 set of
RZ28's and a JBOD RZ29 where Tru64 lives, all in 1 shelf.
I would like to change the Tru64 disk to either mirrored
or RAID5 for a degree of fault tolerance.
The shelf is full but this pedestal unit has space to add
a shelf where Tru64 could live.
>From other posts, I have read the KZPSC is either a single
channel or 3 channel controller.
Can I use the KZPSC to drive both the original and the new
shelf ? If not, can I add a 2nd KZPSC for the 2nd shelf.
Of course, advice on what pitfalls may be encountered is
more than welcome.
TIA
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! Carl Dickhaus, Xavier University, Cincinnati Oh USA !!
!! Internet: SYSTEM@XAVIER.XU.EDU Phone: 513 745 4856 !!
!! Fax: 513 745 4329 !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:21 EDT