From: John Cajas \(TECSINFO\) (jcajas@andinanet.net)
Date: Sun May 18 2003 - 21:05:53 EDT
Hello Admins:
GS140 6/525 with firmware 6.4, 12 CPU's, 8GB RAM, KFTHA on slot 8. I can't
install tru64 UNIX V 5.1 on it, when i tried to boot from cdrom with
operating system some errors appears:
Boot adapter: KZPAA rev2 in bus slot 9 off of kftha0 in TLSB slot 8
Attempting to mount previous root file system disk to save hardware
configuration information...
FAILED
Unable to retain old hardware configuration from SCSI 0 4 0 00 ef00
Trap: invalid memory read access from kernel mode
faulting virtual address: 0x00000000000010
....
...
...
panic (CPU 0): kernel memory fault
.......
Part of the output of show config command is:
Name Type Ext Rev Nnemonic
TLSB
0++ KN7CG-AB
1 KN7CG-AB
2 KN7CG-AB
3 KN7CG-AB
4 KN7CG-AB
5 KN7CG-AB
6 MS7CC
7 MS7CC
8 KFTHA 2000 0 0D03 kftha0
C0 PCI Connected to kftha0
0+ VGA
4+ Qlogic ISP1040B isp0
6+ KGPSA-C kgppsa0
9+ KZPAA kzpaa0
A+ DE500-BA tulip0
There isn't port for keyboard and mouse, then i am installing the OS from
serial console.
isp0 has connected to 2 disks of 36.4 GB (ds-rz1fc-vw).
KGPSA-C, is terminated (no connection to anything)
KZPAA has the cdrom
OpenVMS V 7.3-1 is installed in 1 disk (ds-rz1fc-vw), and the server can
boot from this operating system.
Thanks in advance for any help or suggestion.
Regards.
John Cajas
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:19 EDT