From: Tru64 User (tru64user@yahoo.com)
Date: Tue Mar 11 2003 - 10:38:05 EST
No takers first time....
Basically problem is if I perform
"/sbin/ifconfig tu0 down" it takes tu1 down as well!!
My thinking is that this happens because default route
device is tu0, but I can't change it thru "route
change default -olddev tu0 -dev tu1". (Argument
Invalid)
Route command says default route is usually set to
first device on boot.
Any ideas on solving this problem? I just need to be
able to disable tu0 without affecting tu1.
_Thanks once again in advance........
Richard
--- Tru64 User <tru64user@yahoo.com> wrote:
> Hi ALL,
>
> I have a node with DUAL NICs, same LAN.
>
> say:: NICONE(tu0, 10Mbps) and NICONE-NFS(tu1,
> 100Mbps)
>
> I have to assign NICONE IP address to a new machine,
> and leave this host accessible thru NICONE-NFS.
>
> Current default route device is tu0. Should this be
> doable thru route command?
> I tried couple combinations of "route change" in
> vain.
>
> Problem is that as it is, when i unplug cable for
> tu0,
> tu1 looses connection to the outside as well!! so I
> am
> thinking it is because of the default route going
> thru
> tu0. Adding another route to the net thru device tu1
> adds the route, but still does not resolve the
> problem.
>
> "route add -net OUR_LAN_NET_IP -dev NICONE-NFS"
> ....didn't help.
>
>
> _thanks
>
> =====
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Tax Center - forms, calculators, tips, more
> http://taxes.yahoo.com/
=====
__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
http://webhosting.yahoo.com
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:10 EDT