From: Butler, Mathew (Mathew.Butler@logicacmg.com)
Date: Tue Jan 28 2003 - 19:53:51 EST
I am trying to set up a Swan Speed Demon 56K external Modem on our
AlphaServer 4100 running HP Tru64 V5.1 and using PPP.
This modem is a replacement for a different model, so my assumption is that
all the configuration information currently set up is corrrect.
I have set this modem up on a PC (with all it's internal defaults) and
managed to connect.
However, when I try and access the modem connected to the UNIX box using tip
(to trouble shoot). I receive the 'connected' message and then the
connection hangs. I cannot input any AT commands. Trying to kill the tip
process in any way (including kill -KILL) fails. Currently I am having to
reboot the box each time I try and investigate this. I need another solution
to free up the port associated with the hung process that does not involve a
re-boot.
Does anyone have any ideas?
Mathew Butler
Consultant
LogicaCMG
17-19 Orion Road, Lane Cove West,
Sydney, NSW 2066
Australia
E: mathew_butler@yahoo.co.uk
http://www.logicacmg.com
This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:05 EDT