From: Josiane Tack (Josiane.Tack@dstu.univ-montp2.fr)
Date: Thu Oct 24 2002 - 06:24:25 EDT
Hello,
my question was:
>Hello,
>
>My problem is very simple.
>
>The boot disk is not more recognized by the station DS20!
>
>the message is:
>
>"dkb0.0.0.2001.1 is not ready"
>failed to open dkb0.0.0.2001.1
>
>the command "show dev" don't see the disk dkb0.0.0.2001...
>
>I have no hope to see this disk?
>
>Best Regards
>
>Josiane Tack
I have many answers...
thank you to :
Don Becker, Nasir Yilmaz, Mitterling Barbara, Tom Linden,
Jeffrey_Hummel, Thomas L. Sjolshagen, Tom Linden...
I have test the hardward... make differents operations like:
The other disks on the host adapter are visible...
I moving the drive...
>It is remotely possible that you just have a power problem with
>the disk, and that power cycling the system will fix it,
I make power cycling ..
the answer is: the disk itself has died !
> That's why you should have both a hardware repair contact (or contract) and
>backups of all of the important data, as well as the installation media
>to be able to reinstall the software sufficiently to restore
>a backup.
I contact compaq, I have a new disk yesterday... reinstall a system....
reinstall importants data, because I have backups.
All is nice...
and now I want to install patches PK3...
and have no connection to ftp1.support.compaq.com...
like I said in a other mail :-)
Best regards
Josiane Tack
---------------------------------------------------------------------
Josiane Tack
ISTEEM - CC 056
Universite Montpellier II
Place Eugene Bataillon
34095 MONTPELLIER Cedex 05
E-Mail: Josiane.Tack@dstu.univ-montp2.fr
--------------------------------------------------------------------
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:57 EDT