From: Carl Bavington (c.bavington@videonetworks.com)
Date: Tue Oct 08 2002 - 09:05:54 EDT
Thank you for all your responses.
A few people have had success with consecutive upgrades without a reboot,
although I am hesitant to do this as I haven't got a test server to go from
F4 to F10 in one go. Compaq are quite insistent that you should reboot after
each upgrade.
I suspect, from the responses ive had it is possible, but for safety a
reboot is best?.
I have got the F9 and F10 for V8.6 if required by anyone.
Regards,
Carl
-----Original Message-----
From: tru64-unix-managers-owner@ornl.gov
[mailto:tru64-unix-managers-owner@ornl.gov]On Behalf Of Carl Bavington
Sent: 08 October 2002 10:23
To: tru64-unix-managers@ornl.gov
Subject: ACS Controller Software Patchs for V8.6
Managers,
I have a Dual Redundant pair of HSG80s running at V8.6F-4
We are experiencing many SCSI CAM Errors which Compaq are telling me are
related to this Firmware revision.
I am about to upgrade to V8.6F-10, via F5,F6,F7,F8,F9 then F10.
Am I able to upgrade straight to F10 by concatenating all the text files
together instead of having to do each upgrade and then a reboot, 6 times?.
Also, the website only goes up to V8.6F-8 and doesn't have F9 and F10
available for download?. Does anyone have these, and if so can they please
email them to me.
Thanks in advance.
Regards
Carl Bavington
Development DBA
c.bavington@videonetworks.com
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:55 EDT