From: Adam Bentley (ccx009@coventry.ac.uk)
Date: Tue Oct 08 2002 - 08:47:45 EDT
Thanks to all those who responded. It would appear that the card is likely
a KZPBA-CY which is an HVD device. See below... (thanks Bob)
The Qlogic 1040B/V2 is a KZPBA-CY type controller and that is regular (or
high voltage) differential. the specs for this controller are a bus length
of no more than 25 meters but have also seen some docs that mention to try
not to exceed 20 meters.
thanks again.
-- _
/-\dam
-------------------------------------------------------------------------
FLESH: Adam Bentley, Systems/Networking/Usenet, Coventry University. UK
INET : A.Bentley@coventry.ac.uk
-------------------------------------------------------------------------
#include <std/disclaimer.h>
-------------------------------------------------------------------------
<ORIGINAL QUESTION>
Hi.
Just trying to find some specs on this controller.... Any pointers?
What I need to know is if the controller is LVD or HVD (ie. low or high
voltage differential scsi), as this will affect length of SCSI cable we
can attach....
replies to me please and I will summarise.
BTW, I believe the firmware revision is 5.57 (not that it will make any
difference )
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:55 EDT