DS20 won't boot

From: Paul Crittenden (crittend@storm.simpson.edu)
Date: Wed Sep 18 2002 - 12:42:06 EDT


Over the weekend I installed a new server to replace our old DS20
Alphaserver. I moved the old one out of the way to put in the new one. The
old DS20 is going to our WDM office as a training/disaster recovery
machine. Anyway, the old DS20 has an external disk drive cabinet. I labeled
the external drive cables to be sure I got them reconnected correctly. I
moved the old server to another location in the computer room for
reconfiguration later. I plugged all the cables back in but the system
won't boot.

First, it take 15 to 20 minutes, after I power it on to get the blue screen
where it tests the system and memory. When the system tries to boot it gets
to the point where it says:
starting xcr0; please wait

After a few seconds 3 error messages appears on the screen, but they then
scroll by so fast I can't read them. All that appears after them are blank
lines. I tried to do a ctrl-s to stop the scrolling but that didn't work.

At the boot prompt, >>>, I can do a sh devices and I see all of the disks.
I can do a test at the boot prompt and I can see the disks being accessed.

I wish I could read those error messages so I could pass them on.

Does anyone have any ideas where I can go from here?

Paul Crittenden
Computer System Manager
Simpson College
email: crittend@simpson.edu
Phone: (515)961-1680

"You don't have to attend every argument you're invited to."



This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:53 EDT