From: Gabor.Zelenak@hungarocontrol.hu
Date: Tue Sep 10 2002 - 08:34:36 EDT
Hi there,
I checked couple of spare Alpha500
wks today morning. When the first machine
was turned on, the following lines appeared
on the terminal:
...
R2 R3 R4 R29 saved starting at 07F5A478
R2 = 00000000
R3 = 00000000
R4 = 00000000
R29 = 00000000
*** Console Stopped because of Machine Check ***
*** Press HALT Button to return to console !! ***
....
while at another attempt:
...
CIA ECC_SYN = 00000000000000f3
CIA MEM ERR0 = ffffffffffe00000
CIA MEM ERR1 = 0000000010100000
CIA PCI ERR0 = 0000000002010006
CIA PCI ERR1 = 0000000040008840
EISA bridge NMI status & control = 0000000000000000
panic (cpu 0): Processor Machine Check
DUMP: No primary swap, no explicit dumpdev.
Nowhere to put header, giving up.
*** keyboard not plugged in ...
halted CPU 0
halt code = 5
HALT instruction executed
PC = fffffc000040ef70
boot failure
...
do you have any idea about these strange
behavior? I think the problem is at deep
HW level - what we can expect with
the rest of the working Alpha500s in the
future?
----------------------------------------------
-- Gabor Zelenak
----------------------------------------------
-- HUNGAROCONTROL
-- MATIAS Air Traffic Control System
----------------------------------------------
-- tel.: 36 1 296-9106
-- fax: 36 1 296-9182
-- mb: 36 30 343-1911
-- mailto:gabor.zelenak@hungarocontrol.hu
----------------------------------------------
echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sb20293B5D454552465Bsnlbxq'|dc
----------------------------------------------
10 kind of human existing in the whole world:
- who knows binary numbers,
- who doesn't.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:51 EDT