Getting device serial numbers from HSG80

From: rob.leadbeater@lynx.co.uk
Date: Tue Jul 16 2002 - 09:19:55 EDT

• Next message: Lucas Carey: "SUMMARY: Tru64 v5.1a pk3 release date (Security patches)"
• Previous message: Schwarzkugler, Bernd: "tru64 5.1.A SCSI Adapter 3X-KZPCA-AA panics kernel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

Does anyone know of a way of getting the serial numbers of disks in a
HSG80 ?

A show device full from the HSG80 shows the model number but not the
serial number, however I'm pretty sure that the serial number is stored
somewhere, as when a device reports a fault, it does show the serial
number.

Any hints welcomed !

Regards,

Rob Leadbeater

This message is intended only for the use of the person(s) ("The intended
Recipient(s)") to whom it is addressed. It may contain information which
is privileged and confidential within the meaning of applicable law. If
you are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication are not necessarily
those held by LYNX Express Limited.

• Next message: Lucas Carey: "SUMMARY: Tru64 v5.1a pk3 release date (Security patches)"
• Previous message: Schwarzkugler, Bernd: "tru64 5.1.A SCSI Adapter 3X-KZPCA-AA panics kernel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:46 EDT