Mirroring

From: Valerie Thevenin (thevenin@utt.fr)
Date: Mon Jul 08 2002 - 06:56:06 EDT

• Next message: Gerggee George: "EV5 and EV5.5 processor can work in a machine?"
• Previous message: Bo Mikkelsen: "SUMMARY: Adding disks to existing hsg80 raidset"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello

I administrate a DU 5.1 that I have not installed. I just know that during
the installation disk1 has been mirrored by disk2 with these commands :

volencap dsk1
volreconfig 0

creation of partitions in dsk1 and dsk2 (see below the organisation)

volrootmir -a dsk2

The partition has not been set properly. The partition dsk1d (which
is not used) should be changed. Only dsk1a dsk1b dsk1e dsk1f are used
today.

My question :
If I do a disklabel on dsk1 and dsk2 to change dsk1d and dsk2d in the same
way, will the mirror still work ?

Thanks a lot

V. Thevenin

=============================
Organisation of dsk1 and fsk2
dsk1 :
8 partitions:
# size offset fstype
  a: 262144 0 AdvFS
  b: 5238418 262144 LSMnoprv
  c: 35565080 0 unused
  d: 11680264 524288 unused
  e: 11680264 12204552 AdvFS
  f: 11676168 23884816 AdvFS
  g: 4249111 5500562 LSMnoprv
  h: 4096 35560984 LSMsimp

dsk2 :
8 partitions:
# size offset fstype
  a: 262144 0 AdvFS
  b: 5238418 262144 LSMnoprv
  c: 35565080 0 unused
  d: 11680264 524288 unused
  e: 11680264 12204552 unused
  f: 11676168 23884816 unused
  g: 4249111 5500562 LSMnoprv
  h: 4096 35560984 LSMsimp

• Next message: Gerggee George: "EV5 and EV5.5 processor can work in a machine?"
• Previous message: Bo Mikkelsen: "SUMMARY: Adding disks to existing hsg80 raidset"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:45 EDT