HSG80 8.6 P - 5.1A : Fun whith PREFERRED_PATH

From: EBOVE@bouyguestelecom.fr
Date: Mon May 27 2002 - 06:15:30 EDT

• Next message: Alex: "errors trying to compile tcsh-6.11.00 ;-("
• Previous message: Klaus.Schneider@leica-geosystems.com: "Summary:DEC PWS 500au"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello Gurus,
We are runing a configuration of ES40, 2 KGPSA connected to a pair
of HS80 redondant in multibus failover mode, usin two brocade switches.
When creating an unit , everything is fine. The Preferred_path is correctly
set and
the unit is online on the right controler.
When you reboot the controler, the unit is correctly active on the other
controler.
After the reboot, when the controler is up, the unit stays where it is,
ignoring completly
the "Prefered_path" .
Even with :
# hwmgr -scan scsi
or making I/o on the unit, it stays on the wrong controler and don't come
back to
its original state.

Any ideas would be helpfull,

TIA

Emmanul Bove

• Next message: Alex: "errors trying to compile tcsh-6.11.00 ;-("
• Previous message: Klaus.Schneider@leica-geosystems.com: "Summary:DEC PWS 500au"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:42 EDT