From: Jonathan Williams (jonathw@shubertorg.com)
Date: Fri May 24 2002 - 14:48:36 EDT
oops....forgot to mention. The system is an ES40, running Tru64 5.1, patch kit
3
Jonathan Williams
Unix Systems Administrator
The Shubert Organization, Inc.
----- Original Message -----
From: "Jonathan Williams" <jonathw@shubertorg.com>
To: <tru64-unix-managers@ornl.gov>
Sent: Friday, May 24, 2002 2:32 PM
Subject: HSZ70 Troubles
> Ok...We just added an HSZ70 controller to one of our systems, and I was just
> going through the process of adding the disks, mirrors, and units to the
> controller. It is just mirroring that we use...no stripes or polka-dots or
> anything fancy. Anyway, I added all the disks in, but the system doesn't see
> all of them. The first 7 mirrors the system can see, and in the controller
they
> are numbered as such:
> mirror M1, unit D1 through mirror M7, unit D7
>
> Then, after that the system CANNOT see the following mirrors/units:
> mirror M10, unit D100 through mirror M14, unit D104
>
> I'm sure it has something to do with the SCSI bus, and I vaguely recall
> something about an offset, but for the life of me I really can't remember how
to
> get this to work. We have been using HSG80s exclusively for a while now, and
> don't remember the limitations of the HSZ70. Any help would be most
> appreciated.
>
> Jonathan Williams
> Unix Systems Administrator
> The Shubert Organization, Inc.
>
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:42 EDT