From: Jonathan Williams (jonathw@shubertorg.com)
Date: Fri May 24 2002 - 14:32:16 EDT
Ok...We just added an HSZ70 controller to one of our systems, and I was just
going through the process of adding the disks, mirrors, and units to the
controller. It is just mirroring that we use...no stripes or polka-dots or
anything fancy. Anyway, I added all the disks in, but the system doesn't see
all of them. The first 7 mirrors the system can see, and in the controller they
are numbered as such:
mirror M1, unit D1 through mirror M7, unit D7
Then, after that the system CANNOT see the following mirrors/units:
mirror M10, unit D100 through mirror M14, unit D104
I'm sure it has something to do with the SCSI bus, and I vaguely recall
something about an offset, but for the life of me I really can't remember how to
get this to work. We have been using HSG80s exclusively for a while now, and
don't remember the limitations of the HSZ70. Any help would be most
appreciated.
Jonathan Williams
Unix Systems Administrator
The Shubert Organization, Inc.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:42 EDT